USD Eugen Enin Pro Carbon Free Skates
The Eugen Erin Pro skates are some of the most unique looking skates to drop in sometime. These skates are USD’s Carbon Free model meaning their made of an extremely strong lightweight plastic. Pair the agile lightness of the shell with quality parts and you get a truly amazing feeling skate. These skates already come with a great stock setup, but there’s so much room for customization on this skate the customization possibilities are endless.
The Frames: Kizer Slimline 2 White Frames
Features:
8mm Rocker-able Axels
Aluminum Frame Spacers
Recessed Frame Walls
Concave h-block shape to reduce wheel bite
Allows for multiple different wheel setups
Ideal Flat-Rocker Frame
The Kizer Slimline is one of the younger additions to the Kizer family. The 2011 re-vamped version of this frame has been designed as the ultimate flat setup frame thanks to the help of the industries leaders in frame technology including the one and only Al Dolega.
A flat setup is beneficial for a number of reasons: It allows you better speed and control as well as improved anti-shock. Flat setups allow for faster turns and also allow for longer wheel life.
The Wheels: Dead Champagne 58mm 92a
An all around street and park skating wheel perfectly shaped to balance smooth turning, impact stability and speed.
Two years of meticulous research, design, and development went into engineering a new profile that has been rigorously skated to meet and exceed our standards.
White urethane – maroon logo – champagne circle
Size – 58mm
Hardness – 92a
Bearings: Go Project Freestyle Bearings
Go Project Freestyle bearings are manufactured with great strength making them perfect for side-load and leverage heavy skating disciplines (sharp turning, freestyle, slalom, big wheels etc), They run with extremely low torque and are permeated with an ultra light oil. They use SIX Chrome Steel ball bearings instead of SEVEN for reduced friction. Each ball is marginally bigger than regular bearings making these perfect for a heavy vertical load-bearing sport like inline skating.
While Go Project Freestyle bearings are comparable to an ABEC 7 rated bearing, Go Project does not use the generic ABEC scale to rate bearings because of its irrelevance to the specific tolerances imposed by inline skating. The quality of manufacturing and materials far surpass the importance of a rating based upon ‘revolutions per second’. The Freestyle bearings simply have a Speciality Rating of 4.5/5 which represents their performance when used as a skate bearing.
The Soulplates: USD Carbon Soul Plates
These are the souls that come on all USD Carbon Free or Carbon Skates. These soulplates offer a slim-lined profile with anatomical backslide. These are poured from a very hard plastic, provided much needed durability. If your wanting something a little more beefy check out the USD VII Soul Plates, those work as well on this skate. Those and the USD Carbon Soul Plates souls are available in a wide variety of different colors. Keep in mind we can swap out the color of ANY part on this skate for no additional charge, just gotta call us up and place your order over the phone.
The Liners:
The built in/non-removable liner, this will increase the responsiveness of your skate, since the actual shell and the liner are one. Keep in mind these liners are not replaceable, so to get the most out of the skates you need to make sure your unlacing your skates all the way before you taken them on/off. Be gentile when your putting them on or taking them off, the more you try to jam your foot in or rip it out, the more damage the liner will take. These liners are just as durable as any other aggressive liner. As with all USD Carbon style skates, this skate comes with a 45 degree ankle strap. This helps ensure your foot stays snug inside the liner, and is easily replaceable for customization.
The Cuffs: USD Carbon II Cuffs
These are the cuffs that come stock on these blades. The inner Carbon Fiber shell doesn’t go all the way to the top of the skate, it stops before the ball of your ankle. So having this cuff on is a must for that much needed support. Beefy v-cut in the back to match the shape of the boot to provide optimum flex while keeping substantial support. Slits in the cuff help with this as well. We have these cuffs in a wide variety of different color, and we can swap them out for no additional charge, to do this you gotta call us up and place your order over the phone.
If your thinking about picking up a pair or have some questions, feel free to give us a call at
1-800-772-2502, Monday – Friday, 9am – 5pm pst.
